ORACLE Adhesion Promoter Applicator Pads
Product Overview ▼
The ORACLE Adhesion Promoter Applicator Pad is a convenient, single-use liquid primer designed to maximize the bonding effectiveness of double-stick and VHB foam tapes on common automotive surfaces. Whether you're mounting lighting components, trim pieces, or accessories, this primer ensures a secure, long-lasting bond on Acrylic, ABS, Polycarbonate, and Glass substrates.
Each packet features a built-in applicator pad for clean, mess-free application. Simply wipe the promoter onto the bonding surface, allow 30-90 seconds to dry, and apply your tape immediately for best results. One packet covers approximately 1 square foot - ideal for most single-component installations.
Key Features ▼
- Increases bonding effectiveness of double-stick and VHB foam tapes
- Convenient packet applicator - easy to use, no mess
- Fast dry time - dries in approximately 30 seconds
- Coverage - one packet covers approximately 1 sq/ft
- Compatible surfaces: Acrylic, ABS, Polycarbonate (PC), and Glass
- Designed for use with VHB foam tapes
Performance & Technical Specifications ▼
Vehicle Fitment ▼
This is an installation consumable and is not vehicle-specific. Confirm surface and adhesive compatibility before use.
What's Included ▼
- (1) Adhesion Promoter Applicator Pad
Installation Guide & Resources ▼
- The bonding surface should be clean and dry before application.
- Contaminated surfaces should be cleaned with an untreated, lint-free cloth. To remove wax, grease, or dirt, use isopropyl alcohol or a paint prep solvent.
- Do not use in environmental conditions lower than 55°F.
- Apply a thin, uniform coating to the bonding surface using the minimum amount that will fully coat the area.
- Apply promoter only to areas that will be fully covered with tape.
- Allow 30-90 seconds to dry (drying time may vary due to temperature and/or humidity).
- The primer must be fully dry before applying tape.
- For best results, apply tape immediately after primer application or no more than one hour after.
- Ensure the primed surface remains free from contaminants prior to tape application.
Part Numbers & Options ▼
Policies ▼
Product Overview ▼
The ORACLE Adhesion Promoter Applicator Pad is a convenient, single-use liquid primer designed to maximize the bonding effectiveness of double-stick and VHB foam tapes on common automotive surfaces. Whether you're mounting lighting components, trim pieces, or accessories, this primer ensures a secure, long-lasting bond on Acrylic, ABS, Polycarbonate, and Glass substrates.
Each packet features a built-in applicator pad for clean, mess-free application. Simply wipe the promoter onto the bonding surface, allow 30-90 seconds to dry, and apply your tape immediately for best results. One packet covers approximately 1 square foot - ideal for most single-component installations.
Key Features ▼
- Increases bonding effectiveness of double-stick and VHB foam tapes
- Convenient packet applicator - easy to use, no mess
- Fast dry time - dries in approximately 30 seconds
- Coverage - one packet covers approximately 1 sq/ft
- Compatible surfaces: Acrylic, ABS, Polycarbonate (PC), and Glass
- Designed for use with VHB foam tapes
Performance & Technical Specifications ▼
Vehicle Fitment ▼
This is an installation consumable and is not vehicle-specific. Confirm surface and adhesive compatibility before use.
What's Included ▼
- (1) Adhesion Promoter Applicator Pad
Installation Guide & Resources ▼
- The bonding surface should be clean and dry before application.
- Contaminated surfaces should be cleaned with an untreated, lint-free cloth. To remove wax, grease, or dirt, use isopropyl alcohol or a paint prep solvent.
- Do not use in environmental conditions lower than 55°F.
- Apply a thin, uniform coating to the bonding surface using the minimum amount that will fully coat the area.
- Apply promoter only to areas that will be fully covered with tape.
- Allow 30-90 seconds to dry (drying time may vary due to temperature and/or humidity).
- The primer must be fully dry before applying tape.
- For best results, apply tape immediately after primer application or no more than one hour after.
- Ensure the primed surface remains free from contaminants prior to tape application.