2021-2026 Ford Bronco | MTO V2 Front Bumper
Confidently tackle the trails with our updated Made to Overland Bronco Front Bumper. A hidden winch mount provides recovery options while remaining high clearance. Illuminate the path ahead with a center 20-inch single row light bar, complemented by two 3-inch pod lights mounted to provide dedicated side-angle lighting. Included with the bumper is a bolt-on steel bull bar that can be equipped with up to seven 3-inch pod lights above the bar or one 20-inch dual row light bar below the bar.
Additional recovery options are provided by two 1-inch thick mounts for ¾-inch D-rings. Installation of the bumper is straightforward due to its bolt-on design, and the welded-in zip tie tabs allow for effective wire management. The bumper is compatible with all trim lines including the Bronco Raptor. With its high-quality steel design, resilient micro-texture black powder coat, and aluminum accent panels; this bumper is designed to protect the front of your Bronco in style.
*Please Note: Our Front Camera Relocation Bracket and Adaptive Cruise Control Relocation Bracket are required to retain use of your front camera and ACC functions.
**Please Note: Some minor trimming of the factory skid plate is required for installation; however, we recommend pairing this bumper with our Low Pro Skid Plate for maximum off-road protection. The Low Pro skid plate will NOT fit the Bronco Raptor.
***Please Note: This bumper is not compatible with the factory fog lights. This bumper is not compatible with roller fairleads. We recommend an iron/steel hawse style fairlead if running a steel cable winch.
KEY FEATURES:
- (1) 20” Single Row Light Bar Mount
- (2) 3” Pod Light Mounts
- Hidden Heavy-Duty Winch Mount
- (2) 1” Thick D-Ring Mounts
- Included Steel Bull Bar
- (1) 20” Dual Row Light Bar Bull Bar Mount
- (7) 3” Pod Light Bull Bar Mounts
- Retains the OEM Sensors
- Aluminum Accent Panels
- Welded-In Zip Tie Tabs
- Micro-Texture Black Powder Coat Finish
- 3.5mm & 5mm Steel Construction
Confidently tackle the trails with our updated Made to Overland Bronco Front Bumper. A hidden winch mount provides recovery options while remaining high clearance. Illuminate the path ahead with a center 20-inch single row light bar, complemented by two 3-inch pod lights mounted to provide dedicated side-angle lighting. Included with the bumper is a bolt-on steel bull bar that can be equipped with up to seven 3-inch pod lights above the bar or one 20-inch dual row light bar below the bar.
Additional recovery options are provided by two 1-inch thick mounts for ¾-inch D-rings. Installation of the bumper is straightforward due to its bolt-on design, and the welded-in zip tie tabs allow for effective wire management. The bumper is compatible with all trim lines including the Bronco Raptor. With its high-quality steel design, resilient micro-texture black powder coat, and aluminum accent panels; this bumper is designed to protect the front of your Bronco in style.
*Please Note: Our Front Camera Relocation Bracket and Adaptive Cruise Control Relocation Bracket are required to retain use of your front camera and ACC functions.
**Please Note: Some minor trimming of the factory skid plate is required for installation; however, we recommend pairing this bumper with our Low Pro Skid Plate for maximum off-road protection. The Low Pro skid plate will NOT fit the Bronco Raptor.
***Please Note: This bumper is not compatible with the factory fog lights. This bumper is not compatible with roller fairleads. We recommend an iron/steel hawse style fairlead if running a steel cable winch.
KEY FEATURES:
- (1) 20” Single Row Light Bar Mount
- (2) 3” Pod Light Mounts
- Hidden Heavy-Duty Winch Mount
- (2) 1” Thick D-Ring Mounts
- Included Steel Bull Bar
- (1) 20” Dual Row Light Bar Bull Bar Mount
- (7) 3” Pod Light Bull Bar Mounts
- Retains the OEM Sensors
- Aluminum Accent Panels
- Welded-In Zip Tie Tabs
- Micro-Texture Black Powder Coat Finish
- 3.5mm & 5mm Steel Construction