2025-2026 Toyota 4Runner Spec Series Roof Rack
$1,299.99
Regular price $1,169.99Our 6th Gen Toyota 4Runner Spec Series Roof Rack delivers the perfect balance of strength, versatility, and design. Built with ten 80/20 T-slot crossbars using M6 T-nuts, it offers nearly endless mounting options for tie-downs, gear, and accessories. M6 slots run along the top and rear of the rack, while full-length side slots make it easy to add scene lights, recovery tools, or other equipment. A couple standout features of our rack, is that it features the lowest-profile fitment, and that no rubber trim is necessary as the rack does not make contact with your body panels.
At the rear crossmember, integrated mounting slots allow for up to a 40-inch rear light bar, providing plenty of illumination for camp setups or reversing on the trail. Steel mounting feet distribute weight evenly across the roof, supporting everything from roof-top tents to storage boxes. Removable rear styling fins open up space for flush-mounted accessories such as awnings or large roof tents, giving you flexibility for any overland setup.
Conveniently positioned mounting bolt locations on the outer edge of the sidewalls make for easy installation even when the rack is loaded with a rooftop tent and gear. This allows you to assemble the rack on the ground, mount your RTT and accessories, then lift the entire assembly onto the pre-installed roof rail mounting feet, and secure the bolts from the outside with no awkward reaching or unloading required. The 90-degree bend in the sidewalls serves a dual-purpose, adding serious structural rigidity while integrating mounting slots along the entire length of the rack, delivering virtually unlimited mounting configurations for scene lighting, awnings, and more from front to back.
The rack’s lightweight aluminum construction keeps overall weight down while maintaining strength, paired with a gloss black steel accent plate for a premium look. The angled fairing is engineered to match the 4Runner’s body lines and reduce wind noise, outperforming the rounded designs used by competitors. With an ultra-low-profile fit that works seamlessly with sunroof-equipped models, this rack enhances both form and function.
Key Features:
- (10) Cross Bars with 80/20 T-Slots (uses M6 T-nuts)
- M6 slots along the top and rear for various mounting applications or tie down points
- Side slots along entire length of rack for mounting scene lights
- Mounting slots along rear plate for backup lights
- Optional Light Cutout Front Fairing (Sold Separately)
- Can mount a 40” light bar on rear cross bar
- Steel mounting feet to be able to hold all the weight desired along the rack
- Removable rear styling fins to allow for flush accessory mounting applications (tents, awnings, etc.)
- Angular wind deflector that matches the style of the vehicle better than competitors rounded version but retain quite low noise wind deflection
- Lightweight aluminum design (steel gloss black accent plate)
- 90-Degree Bend in the Sidewalls for Strength
- Slotted Mounting Points Along entire Length of the Top of Sidewalls
- Exterior Facing Mounting Bolts for Easy Install
- Sunroof applications work with no changes
- Ultra low profile design
- Designed to hold tents, storage, gear and more
- Added weight above the roof line can change the vehicles center of gravity
- Refer to the owners manual regarding the weight capacity of the vehicles roof mounting points
- Micro-Texture Black Powder Coat
$1,299.99
Regular price $1,169.99Our 6th Gen Toyota 4Runner Spec Series Roof Rack delivers the perfect balance of strength, versatility, and design. Built with ten 80/20 T-slot crossbars using M6 T-nuts, it offers nearly endless mounting options for tie-downs, gear, and accessories. M6 slots run along the top and rear of the rack, while full-length side slots make it easy to add scene lights, recovery tools, or other equipment. A couple standout features of our rack, is that it features the lowest-profile fitment, and that no rubber trim is necessary as the rack does not make contact with your body panels.
At the rear crossmember, integrated mounting slots allow for up to a 40-inch rear light bar, providing plenty of illumination for camp setups or reversing on the trail. Steel mounting feet distribute weight evenly across the roof, supporting everything from roof-top tents to storage boxes. Removable rear styling fins open up space for flush-mounted accessories such as awnings or large roof tents, giving you flexibility for any overland setup.
Conveniently positioned mounting bolt locations on the outer edge of the sidewalls make for easy installation even when the rack is loaded with a rooftop tent and gear. This allows you to assemble the rack on the ground, mount your RTT and accessories, then lift the entire assembly onto the pre-installed roof rail mounting feet, and secure the bolts from the outside with no awkward reaching or unloading required. The 90-degree bend in the sidewalls serves a dual-purpose, adding serious structural rigidity while integrating mounting slots along the entire length of the rack, delivering virtually unlimited mounting configurations for scene lighting, awnings, and more from front to back.
The rack’s lightweight aluminum construction keeps overall weight down while maintaining strength, paired with a gloss black steel accent plate for a premium look. The angled fairing is engineered to match the 4Runner’s body lines and reduce wind noise, outperforming the rounded designs used by competitors. With an ultra-low-profile fit that works seamlessly with sunroof-equipped models, this rack enhances both form and function.
Key Features:
- (10) Cross Bars with 80/20 T-Slots (uses M6 T-nuts)
- M6 slots along the top and rear for various mounting applications or tie down points
- Side slots along entire length of rack for mounting scene lights
- Mounting slots along rear plate for backup lights
- Optional Light Cutout Front Fairing (Sold Separately)
- Can mount a 40” light bar on rear cross bar
- Steel mounting feet to be able to hold all the weight desired along the rack
- Removable rear styling fins to allow for flush accessory mounting applications (tents, awnings, etc.)
- Angular wind deflector that matches the style of the vehicle better than competitors rounded version but retain quite low noise wind deflection
- Lightweight aluminum design (steel gloss black accent plate)
- 90-Degree Bend in the Sidewalls for Strength
- Slotted Mounting Points Along entire Length of the Top of Sidewalls
- Exterior Facing Mounting Bolts for Easy Install
- Sunroof applications work with no changes
- Ultra low profile design
- Designed to hold tents, storage, gear and more
- Added weight above the roof line can change the vehicles center of gravity
- Refer to the owners manual regarding the weight capacity of the vehicles roof mounting points
- Micro-Texture Black Powder Coat