2024-2026 Toyota Tacoma Double Cab Spec Series Roof Rack
Our 4th Gen Tacoma Spec Series Roof Rack combines a sturdy design and diverse mounting capabilities for the perfect solution to your off-road storage needs. The six 80/20 cross bars provide T-slots for mounting and tying down gear using M6 T-nuts. The removable rear fins allow for flush mounting of roof top tents, awnings, and other large camping solutions. The rack features an ultra low-profile design that complements the styling of your Tacoma, and its angular wind deflector not only provides a sleek look, but also minimizes wind noise and resistance.
The Spec Series Tacoma Roof Rack provides steel mounting feet that hold the added weight of your equipment and gear for an overall sturdy design. The 90-degree bent sidewalls provide enhanced structural integrity while offering side rail mounting slots along both sides of the rack for endless mounting possibilities. The roof rack mounting bolt locations sit on the outer edge of the sidewalls, making installation easy by assembling your rack on the ground, loading it up with your RTT and gear, then lift it onto the pre-installed mounting feet and secure the bolts from the outside of the rack.
Our optional Front Light Mount allows you to run two 20-inch single row light bars, one 40-inch single row light bar, or ten 3-inch pod lights. The roof rack features rock light side slot mounts along the entire length of the rack for lighting up your surroundings on the trail or at the campsite. The rear slot mounts allow you to run backup lights for supplemental lighting when in low-visibility conditions. Additionally, the rear cross bar is compatible with a 40-inch light bar. Our roof rack is made from durable & lightweight aluminum, and it is finished in a micro-texture black powder coat with gloss black steel accent panels for a sleek look. Whether you’re looking to mount a roof top tent, storage boxes, recovery tools, or other gear, our roof rack is built to handle the added weight from all of your adventure equipment and accessories.
* Please Note: Refer to the owners manual regarding the weight capacity of the vehicle's roof mounting points.
** Please Note: Added weight above the roof line can change the vehicle's center of gravity.
*** Please Note: The rack is only compatible with Double Cab models, and it will not fit XtraCab models. Models that feature a sunroof will need to run one less cross bar to clear for tilt position.
KEY FEATURES:
- Mounts Tents, Storage Boxes, Tools, & Other Off-Road Gear
- Ultra Low-Profile Fitment
- (6) 80/20 T-Slot Cross Bars
- Integrated Mounting Points on Cross Bars for Securing Supplies Using M6 T-Nuts
- Side Slot Mounts for Rock Lights
- Rear Slot Mounts for Backup Lights
- Rear Cross Bar Compatible w/ 40” Light Bar
- Steel Mounting Feet
- Removable Rear Styling Fins for Flush Accessory Mounting Capabilities
- 90-Degree Bend in the Sidewalls for Strength
- Slotted Mounting Points Along entire Length of the Top of Sidewalls
- Exterior Facing Mounting Bolts for Easy Install
- Optional Front Light Mount
- Fully Bolt-On Installation
- Micro-Texture Black Powder Coated Finish
- Gloss Black Steel Accent Panels
- Lightweight Aluminum Design
Our 4th Gen Tacoma Spec Series Roof Rack combines a sturdy design and diverse mounting capabilities for the perfect solution to your off-road storage needs. The six 80/20 cross bars provide T-slots for mounting and tying down gear using M6 T-nuts. The removable rear fins allow for flush mounting of roof top tents, awnings, and other large camping solutions. The rack features an ultra low-profile design that complements the styling of your Tacoma, and its angular wind deflector not only provides a sleek look, but also minimizes wind noise and resistance.
The Spec Series Tacoma Roof Rack provides steel mounting feet that hold the added weight of your equipment and gear for an overall sturdy design. The 90-degree bent sidewalls provide enhanced structural integrity while offering side rail mounting slots along both sides of the rack for endless mounting possibilities. The roof rack mounting bolt locations sit on the outer edge of the sidewalls, making installation easy by assembling your rack on the ground, loading it up with your RTT and gear, then lift it onto the pre-installed mounting feet and secure the bolts from the outside of the rack.
Our optional Front Light Mount allows you to run two 20-inch single row light bars, one 40-inch single row light bar, or ten 3-inch pod lights. The roof rack features rock light side slot mounts along the entire length of the rack for lighting up your surroundings on the trail or at the campsite. The rear slot mounts allow you to run backup lights for supplemental lighting when in low-visibility conditions. Additionally, the rear cross bar is compatible with a 40-inch light bar. Our roof rack is made from durable & lightweight aluminum, and it is finished in a micro-texture black powder coat with gloss black steel accent panels for a sleek look. Whether you’re looking to mount a roof top tent, storage boxes, recovery tools, or other gear, our roof rack is built to handle the added weight from all of your adventure equipment and accessories.
* Please Note: Refer to the owners manual regarding the weight capacity of the vehicle's roof mounting points.
** Please Note: Added weight above the roof line can change the vehicle's center of gravity.
*** Please Note: The rack is only compatible with Double Cab models, and it will not fit XtraCab models. Models that feature a sunroof will need to run one less cross bar to clear for tilt position.
KEY FEATURES:
- Mounts Tents, Storage Boxes, Tools, & Other Off-Road Gear
- Ultra Low-Profile Fitment
- (6) 80/20 T-Slot Cross Bars
- Integrated Mounting Points on Cross Bars for Securing Supplies Using M6 T-Nuts
- Side Slot Mounts for Rock Lights
- Rear Slot Mounts for Backup Lights
- Rear Cross Bar Compatible w/ 40” Light Bar
- Steel Mounting Feet
- Removable Rear Styling Fins for Flush Accessory Mounting Capabilities
- 90-Degree Bend in the Sidewalls for Strength
- Slotted Mounting Points Along entire Length of the Top of Sidewalls
- Exterior Facing Mounting Bolts for Easy Install
- Optional Front Light Mount
- Fully Bolt-On Installation
- Micro-Texture Black Powder Coated Finish
- Gloss Black Steel Accent Panels
- Lightweight Aluminum Design