2022-2026 Toyota Tundra | Centric Series Front Bumper
Our Centric Series Tundra Front Bumper has all the features you need in an off-road bumper, in a compact & low-profile package. This bumper was designed to complement factory styling, avoid altering the fenders, and to provide lighting and multiple recovery options. Central to the bumper is a hidden winch mount capable of fitting multiple size winches. Winch access is provided above the bumper, just beneath the grille. Cutaways on either side of the fairlead provide mounting points for 3-inch light pods. If you’re not running pods at these cutaways, they can be used as additional access points for the winch. Below the winch is an inset mounting point for a single row 20-inch light bar to light up the trail ahead. Additional recovery options are afforded by the 1-inch thick D-ring mounts that take ¾-inch D-rings with ⅞-inch shackle pins.
The bumper sits in a low profile, retaining the factory approach angle. Our design retains all nearby factory features, including adaptive cruise control, and parking sensors. The Centric Tundra Bumper is also compatible with all factory skid plates. Installation requires minor cutting of the center bumper cover, but its narrow width prevents the need to cut into the wraparound front fenders.
* Please Note: If your truck is equipped with the factory air dam, it must be removed during installation. Our kit includes a relocation bracket for the air dam motor to prevent trouble codes. On Hybrid Models, you will need to run a aftermarket air damp delete module as the provided relocation bracket is not compatible.
** Please Note: This bumper is not compatible with roller fairleads. We recommend an iron/steel hawse style fairlead if running a steel cable winch.
*** Please Note: Some cutting required for installation.
Key Features:
- Center Mount Factory Style Bumper
- Hidden Winch Mount
- Accepts Multiple Size Winches
- 1” Thick D-Ring Mounts for ¾” Shackles
- Mounting Point for 20” Single Row Light Bar
- (2) Mounting Points for 3” Light Pods (Only When Not Running a Winch)
- Welded Tabs Provide Clean Wire Management Options
- Compatible with Adaptive Cruise, & Parking Sensors
- Compatible with All Factory Skid Plates
- Compatible with all Trim Levels
Our Centric Series Tundra Front Bumper has all the features you need in an off-road bumper, in a compact & low-profile package. This bumper was designed to complement factory styling, avoid altering the fenders, and to provide lighting and multiple recovery options. Central to the bumper is a hidden winch mount capable of fitting multiple size winches. Winch access is provided above the bumper, just beneath the grille. Cutaways on either side of the fairlead provide mounting points for 3-inch light pods. If you’re not running pods at these cutaways, they can be used as additional access points for the winch. Below the winch is an inset mounting point for a single row 20-inch light bar to light up the trail ahead. Additional recovery options are afforded by the 1-inch thick D-ring mounts that take ¾-inch D-rings with ⅞-inch shackle pins.
The bumper sits in a low profile, retaining the factory approach angle. Our design retains all nearby factory features, including adaptive cruise control, and parking sensors. The Centric Tundra Bumper is also compatible with all factory skid plates. Installation requires minor cutting of the center bumper cover, but its narrow width prevents the need to cut into the wraparound front fenders.
* Please Note: If your truck is equipped with the factory air dam, it must be removed during installation. Our kit includes a relocation bracket for the air dam motor to prevent trouble codes. On Hybrid Models, you will need to run a aftermarket air damp delete module as the provided relocation bracket is not compatible.
** Please Note: This bumper is not compatible with roller fairleads. We recommend an iron/steel hawse style fairlead if running a steel cable winch.
*** Please Note: Some cutting required for installation.
Key Features:
- Center Mount Factory Style Bumper
- Hidden Winch Mount
- Accepts Multiple Size Winches
- 1” Thick D-Ring Mounts for ¾” Shackles
- Mounting Point for 20” Single Row Light Bar
- (2) Mounting Points for 3” Light Pods (Only When Not Running a Winch)
- Welded Tabs Provide Clean Wire Management Options
- Compatible with Adaptive Cruise, & Parking Sensors
- Compatible with All Factory Skid Plates
- Compatible with all Trim Levels