2020-2026 Jeep Gladiator JT Racetrack LED Tailgate Panel Light | Mopar-Inspired
Regular price
$611.50
Lens Type
ORACLE Mopar-Inspired "Racetrack" LED Tailgate Panel for 2020-2026 Jeep Gladiator JT
Complete your Jeep's rear transformation with the perfect finishing touch. Inspired by the iconic Mopar "Racetrack" tail light design seen on the Dodge Charger and Durango, this panel spans the full length of your tailgate to form one continuous, jaw-dropping LED lighting signature.
Engineered strictly as the ultimate companion piece to ORACLE’s Flush-Mount LED Tail Lights (Part# 5882-504), this low-profile, rugged polycarbonate panel links your left and right lights together into a unified, high-end display that commands attention on the pavement and protects your rig on the trails.
Key Product Features
- Mopar-Inspired Styling: Reimagines the legendary, continuous muscle car accent bar for a clean, aggressive, and seamless factory+ look across your tailgate.
- Full LED Functionality: Syncs perfectly with your brakes, running lights, and dynamic sequential turn signals for unmatched rear presence.
- Eye-Catching Turn Signal Sweeps: Dynamic motion turn signals feature a highly visible fluid animation that drastically improves safety during daytime or nighttime trail runs.
- Zero-Tool 1-Hour Install: Skip the drilling and permanent modifications. Simply peel and stick using the pre-installed, industrial-strength VHB adhesive backing.
- True Plug-and-Play Wiring: Powers directly through your vehicle's standard 4-pin trailer connector wire out of the box—no splicing or wire cutting necessary!
- CAN-Bus Friendly Engineering: Built with smart circuit protection to prevent annoying dashboard error codes, hyperflashing, or electrical flickering.
- Durable Trail Build: Crafted from impact-resistant polycarbonate to confidently brush off mud, extreme weather, water pressure, and off-road brush.
Critical Requirement & Note
- Requires ORACLE Flush LED Tail Lights: This product will not work with factory OEM tail lights or other aftermarket brands. It is designed exclusively to bridge ORACLE Part# 5882-504 into a single continuous signature block.
Performance & Technical Specifications
- Vehicle Fitment: 2020, 2021, 2022, 2023, 2024, 2025, and 2026 Jeep Gladiator JT (All trims: Base, Sport, Overland, Rubicon, Mojave)
- Turn Signal Animation: Dynamic Sequential Sweep
- Mounting Method: Pre-Applied Heavy-Duty Industrial VHB Tape
- Power Connection: Standard 4-Pin Plug (Optional 7-Pin T-Harness Part# 6113-504 available separately to hide all wiring behind the bumper)
- Installation Time: ~1 Hour (No hand tools required)
- Warranty Protection: Backed by a 2-Year Limited Manufacturer Warranty
Available Lens Options & Part Numbers
- Standard Clear/Red (Part #5918-504): Features a sharp, high-contrast crisp look that perfectly matches traditional red lighting arrays.
- Tinted Smoked (Part #5918-504-T): Smoked lenses that blend cleanly away into dark trim pieces, custom wraps, or stealth configurations.
What’s Included in the Box
- (1) Racetrack Flush LED Tailgate Panel Assembly
- (1) Attached 4-Pin Plug-and-Play Wiring Harness
- (1) Pre-Installed Automotive-Grade VHB Tape Array
- (1) Digital Step-by-Step Installation Guide
Regular price
$611.50
Lens Type
ORACLE Mopar-Inspired "Racetrack" LED Tailgate Panel for 2020-2026 Jeep Gladiator JT
Complete your Jeep's rear transformation with the perfect finishing touch. Inspired by the iconic Mopar "Racetrack" tail light design seen on the Dodge Charger and Durango, this panel spans the full length of your tailgate to form one continuous, jaw-dropping LED lighting signature.
Engineered strictly as the ultimate companion piece to ORACLE’s Flush-Mount LED Tail Lights (Part# 5882-504), this low-profile, rugged polycarbonate panel links your left and right lights together into a unified, high-end display that commands attention on the pavement and protects your rig on the trails.
Key Product Features
- Mopar-Inspired Styling: Reimagines the legendary, continuous muscle car accent bar for a clean, aggressive, and seamless factory+ look across your tailgate.
- Full LED Functionality: Syncs perfectly with your brakes, running lights, and dynamic sequential turn signals for unmatched rear presence.
- Eye-Catching Turn Signal Sweeps: Dynamic motion turn signals feature a highly visible fluid animation that drastically improves safety during daytime or nighttime trail runs.
- Zero-Tool 1-Hour Install: Skip the drilling and permanent modifications. Simply peel and stick using the pre-installed, industrial-strength VHB adhesive backing.
- True Plug-and-Play Wiring: Powers directly through your vehicle's standard 4-pin trailer connector wire out of the box—no splicing or wire cutting necessary!
- CAN-Bus Friendly Engineering: Built with smart circuit protection to prevent annoying dashboard error codes, hyperflashing, or electrical flickering.
- Durable Trail Build: Crafted from impact-resistant polycarbonate to confidently brush off mud, extreme weather, water pressure, and off-road brush.
Critical Requirement & Note
- Requires ORACLE Flush LED Tail Lights: This product will not work with factory OEM tail lights or other aftermarket brands. It is designed exclusively to bridge ORACLE Part# 5882-504 into a single continuous signature block.
Performance & Technical Specifications
- Vehicle Fitment: 2020, 2021, 2022, 2023, 2024, 2025, and 2026 Jeep Gladiator JT (All trims: Base, Sport, Overland, Rubicon, Mojave)
- Turn Signal Animation: Dynamic Sequential Sweep
- Mounting Method: Pre-Applied Heavy-Duty Industrial VHB Tape
- Power Connection: Standard 4-Pin Plug (Optional 7-Pin T-Harness Part# 6113-504 available separately to hide all wiring behind the bumper)
- Installation Time: ~1 Hour (No hand tools required)
- Warranty Protection: Backed by a 2-Year Limited Manufacturer Warranty
Available Lens Options & Part Numbers
- Standard Clear/Red (Part #5918-504): Features a sharp, high-contrast crisp look that perfectly matches traditional red lighting arrays.
- Tinted Smoked (Part #5918-504-T): Smoked lenses that blend cleanly away into dark trim pieces, custom wraps, or stealth configurations.
What’s Included in the Box
- (1) Racetrack Flush LED Tailgate Panel Assembly
- (1) Attached 4-Pin Plug-and-Play Wiring Harness
- (1) Pre-Installed Automotive-Grade VHB Tape Array
- (1) Digital Step-by-Step Installation Guide