TRIGGER 6 SHOOTER Controller Toyota 4Runner, Lexus GX 470, & FJ Cruiser Combo Kit
Part Number: 30014RUN
The TRIGGER 6 SHOOTER Toyota 4Runner, Lexus GX 470, & FJ Cruiser Combo Kit pairs our critically acclaimed TRIGGER 6 SHOOTER Wireless Controller with two essential installation accessories: Our Wheel-Well Controller Mounting Bracket and the Universal Pedestal Mount!
The TRIGGER 6 SHOOTER Wireless Accessory Controller
Save installation time for your electronic accessories! Eliminate the need to run wires under the dash or through the firewall of a vehicle when wiring accessories. Add functionality such as an RF remote control for activating installed accessories from outside the vehicle. In addition, fused circuits with LED indicators notify you of circuit status or blown fuses.
The included battery-powered RF remote utilizes a universal mounting system that will accommodate round as well as flat surfaces. Its buttons are back-lit and it is programmable for security or use with additional remote's. Several TRIGGER control boxes and remotes can be used together to control up to 24 accessories. When mounted to a UTV roll bar, the buttons on the remote are more easily accessible than dash switches. There is no straining against seat belts to reach the dash, just a quick reach up to flip a switch.
The Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. It is simple to set up and allows for user customization. Use the app to "TRIGGER" lights from outside the vehicle whenever you might need to activate an accessory on demand.
A few notable features:
-
- Accepts 12-24 Volt input
- Two 30 amp fused circuits w/12-24 Volt output
- Two 10 amp fused circuits w/12-24 Volt output
- Two 5 amp fused circuits w/12-24 Volt output
- Includes 6 wire harnesses with waterproof connectors
- Wireless back-lit RF remote rocker switch module
- Backlit switches when optionally connected to 12 Volt power via an 8′ long, thin 28 gauge harness
- You can control it from your mobile device with our free TRIGGER ACS PLUS App for iOS/Android!
- Comes with switch labels too!
- Free 3-year warranty that covers manufacturing defects
NOW FEATURED IN 'THE SHOP' MAGAZINE! CLICK TO CHECK OUT THE ARTICLE!
Need a longer wire run? Additional TRIGGER Wiring Harnesses are also available, click here to shop.
TRIGGER 6 SHOOTER Universal Pedestal Mount
Use the TRIGGER 6 SHOOTER Universal Pedestal Mount to expand the connectivity of your TRIGGER System!
The TRIGGER Universal Pedestal mounting system is designed for quick and easy installation. In fact, it allows the TRIGGER 6 SHOOTER RF remote assembly to be quickly and easily mounted in one of the most easily accessed areas of your interior. Furthermore, it is easily removable without causing any damage to the vehicle. The plastic body includes a steel sub-structure that incorporates a clip system for attachment to the vehicle. Includes hardware for mounting your RF remote base. Once mounted, the bracket allows the remote to move up and down angle adjustment for improved switch accessibility.
Indeed, designed only for use with the TRIGGER 6 SHOOTER RF remote.
For use with the TRIGGER 6 SHOOTER Wireless Accessory Control System.
TRIGGER 6 SHOOTER Toyota 4Runner Universal Mount
The TRIGGER Universal mounting system is designed for quick and easy "No Tools" installation. In fact, it allows the TRIGGER 6 SHOOTER RF remote assembly to be quickly and easily mounted in one of the most easily accessed areas of the interior. Furthermore, it requires no drilling or screws and is easily removable without causing any damage to the vehicle. The plastic body includes a steel sub-structure that incorporates a clip system for attachment to the vehicle. Includes hardware for mounting your RF remote base. Once mounted, the bracket allows the remote a few degrees of up and down angle adjustment for improved switch accessibility.
TRIGGER Toyota 4Runner Underhood Controller Bracket
- Fits 4th generation Toyota 4Runner, 2002-2009
- Fits 5th generation Toyota 4Runner, 2009-Present (sorry, will not fit 2020 TRD model)
- Fits 1st generation Lexus GX 470, 2002-2009
- Also Fits FJ Cruiser, All Years
The TRIGGER 4Runner underhood mounting system is designed for quick and easy installation. Mount the TRIGGER controller module in an otherwise unused location under the hood, adjacent to the fuse box and battery. It requires no drilling and is easily removable without causing any damage to the vehicle. Laser-cut aluminum sheet metal for long-lasting strength and durability.
Please note: Due to Federal regulations surrounding lithium battery cells, any TRIGGER Controller products shipping by air (FedEx 2nd Day or FedEx Overnight services) will have their batteries removed before shipment. For replacement cells please purchase CR2025 for the 4 PLUS controller, CR2032 for the 6 SHOOTER controller…these are readily available at most brick and mortar and online shops.
View TRIGGER 6 SHOOTER Quick Start Guide
View TRIGGER 6 SHOOTER Universal Pedestal Mount Assembly Guide
View TRIGGER Toyota 4Runner Underhood Controller Bracket Install Guide
Part Number: 30014RUN
The TRIGGER 6 SHOOTER Toyota 4Runner, Lexus GX 470, & FJ Cruiser Combo Kit pairs our critically acclaimed TRIGGER 6 SHOOTER Wireless Controller with two essential installation accessories: Our Wheel-Well Controller Mounting Bracket and the Universal Pedestal Mount!
The TRIGGER 6 SHOOTER Wireless Accessory Controller
Save installation time for your electronic accessories! Eliminate the need to run wires under the dash or through the firewall of a vehicle when wiring accessories. Add functionality such as an RF remote control for activating installed accessories from outside the vehicle. In addition, fused circuits with LED indicators notify you of circuit status or blown fuses.
The included battery-powered RF remote utilizes a universal mounting system that will accommodate round as well as flat surfaces. Its buttons are back-lit and it is programmable for security or use with additional remote's. Several TRIGGER control boxes and remotes can be used together to control up to 24 accessories. When mounted to a UTV roll bar, the buttons on the remote are more easily accessible than dash switches. There is no straining against seat belts to reach the dash, just a quick reach up to flip a switch.
The Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. It is simple to set up and allows for user customization. Use the app to "TRIGGER" lights from outside the vehicle whenever you might need to activate an accessory on demand.
A few notable features:
-
- Accepts 12-24 Volt input
- Two 30 amp fused circuits w/12-24 Volt output
- Two 10 amp fused circuits w/12-24 Volt output
- Two 5 amp fused circuits w/12-24 Volt output
- Includes 6 wire harnesses with waterproof connectors
- Wireless back-lit RF remote rocker switch module
- Backlit switches when optionally connected to 12 Volt power via an 8′ long, thin 28 gauge harness
- You can control it from your mobile device with our free TRIGGER ACS PLUS App for iOS/Android!
- Comes with switch labels too!
- Free 3-year warranty that covers manufacturing defects
NOW FEATURED IN 'THE SHOP' MAGAZINE! CLICK TO CHECK OUT THE ARTICLE!
Need a longer wire run? Additional TRIGGER Wiring Harnesses are also available, click here to shop.
TRIGGER 6 SHOOTER Universal Pedestal Mount
Use the TRIGGER 6 SHOOTER Universal Pedestal Mount to expand the connectivity of your TRIGGER System!
The TRIGGER Universal Pedestal mounting system is designed for quick and easy installation. In fact, it allows the TRIGGER 6 SHOOTER RF remote assembly to be quickly and easily mounted in one of the most easily accessed areas of your interior. Furthermore, it is easily removable without causing any damage to the vehicle. The plastic body includes a steel sub-structure that incorporates a clip system for attachment to the vehicle. Includes hardware for mounting your RF remote base. Once mounted, the bracket allows the remote to move up and down angle adjustment for improved switch accessibility.
Indeed, designed only for use with the TRIGGER 6 SHOOTER RF remote.
For use with the TRIGGER 6 SHOOTER Wireless Accessory Control System.
TRIGGER 6 SHOOTER Toyota 4Runner Universal Mount
The TRIGGER Universal mounting system is designed for quick and easy "No Tools" installation. In fact, it allows the TRIGGER 6 SHOOTER RF remote assembly to be quickly and easily mounted in one of the most easily accessed areas of the interior. Furthermore, it requires no drilling or screws and is easily removable without causing any damage to the vehicle. The plastic body includes a steel sub-structure that incorporates a clip system for attachment to the vehicle. Includes hardware for mounting your RF remote base. Once mounted, the bracket allows the remote a few degrees of up and down angle adjustment for improved switch accessibility.
TRIGGER Toyota 4Runner Underhood Controller Bracket
- Fits 4th generation Toyota 4Runner, 2002-2009
- Fits 5th generation Toyota 4Runner, 2009-Present (sorry, will not fit 2020 TRD model)
- Fits 1st generation Lexus GX 470, 2002-2009
- Also Fits FJ Cruiser, All Years
The TRIGGER 4Runner underhood mounting system is designed for quick and easy installation. Mount the TRIGGER controller module in an otherwise unused location under the hood, adjacent to the fuse box and battery. It requires no drilling and is easily removable without causing any damage to the vehicle. Laser-cut aluminum sheet metal for long-lasting strength and durability.
Please note: Due to Federal regulations surrounding lithium battery cells, any TRIGGER Controller products shipping by air (FedEx 2nd Day or FedEx Overnight services) will have their batteries removed before shipment. For replacement cells please purchase CR2025 for the 4 PLUS controller, CR2032 for the 6 SHOOTER controller…these are readily available at most brick and mortar and online shops.
View TRIGGER 6 SHOOTER Quick Start Guide
View TRIGGER 6 SHOOTER Universal Pedestal Mount Assembly Guide
View TRIGGER Toyota 4Runner Underhood Controller Bracket Install Guide